Oklagarden 66795 66032 genesis ii gs4 e310 e335 Grill Part Review
Our verdict
The Oklagarden 66795/66032 kit targets the Weber Genesis II GS4 system used in the E310 and E335 models, priced at $26.99 with a 4.4-star average from 47 reviews. It is a focused option for a specific and widely owned Weber grill configuration.
Check price on AmazonBest for
Weber Genesis II E310 or E335 owners with GS4 burner systems needing parts matching the 66795 or 66032 part numbers.
Skip if
Your Weber Genesis II uses a different part number, or if you have an older Genesis model that predates the GS4 system.
- Dimensions 15.63 X 3.66 X 2.48 In
- Weight 3.15 lb
Pros
- Explicitly targets Weber Genesis II GS4 E310 and E335, reducing compatibility guesswork
- Covers two common GS4 part numbers (66795 and 66032)
- Lightweight at 3.15 lbs with a compact footprint for easy installation
- Under $27, significantly below OEM Weber part pricing
Cons
- Only 47 reviews, providing less confidence than higher-volume alternatives
- No published material specs or BTU information
- Compatibility is limited to E310 and E335 GS4 models, not broader Genesis II range
- Rating of 4.4 stars is solid but not the highest in this category
Our scorecard
-
Owner rating4.4/5
4.4 average across 47 owner ratings
-
Popularity0.6/5
47 owner reviews, fewer than most models here
The overall score is owner satisfaction weighted by how many reviews back it, so a high rating from few reviews counts for less. The bars below show where this model stands against the other grills, grill parts and burners, smokers and smoking gear, grill tools, outdoor griddles, outdoor kitchen appliances and grill covers we track in this category on price, popularity and size. Context, not marks against it, and our read of the data, not a lab test.
Overview
['This Oklagarden kit is built specifically for the Weber Genesis II with the GS4 burner system, covering the E310 and E335 models under part numbers 66795 and 66032. The Genesis II GS4 is one of the most popular Weber gas grill systems, so the potential compatibility pool is large.', 'At 15.63 x 3.66 x 2.48 inches and 3.15 lbs, the kit is compact and lightweight. That profile is consistent with flavorizer bars or heat shield plates, which are among the most commonly replaced parts on GS4-equipped grills as they sit directly above the burners and take the most heat cycling.', 'The 4.4-star average across 47 reviews is moderate in volume but shows a predominantly positive buyer experience. At $26.99, it undercuts OEM Weber replacement prices by a meaningful margin for a model-specific part.']
Specifications
| Dimensions | 15.63 X 3.66 X 2.48 In |
|---|---|
| Weight | 3.15 lb |
Performance notes
Fuel type, BTU, cooking area, and material are not published. Dimensions of 15.63 x 3.66 x 2.48 inches and a weight of 3.15 lbs match the typical profile of flavorizer bars for a three-burner Weber Genesis II configuration. The GS4 system on E310 and E335 grills typically runs on propane with three primary burners. Confirming your specific grill year is important as Weber introduced the GS4 system with the 2017 Genesis II refresh.
What buyers say
At 4.4 stars from 47 reviews, buyer sentiment is positive but the sample size is smaller than comparable listings. The score suggests most buyers who verified GS4 E310/E335 compatibility found a good fit. The lower volume means there is less data to assess edge cases or inconsistencies across grill production years.
Similar grills, grill parts and burners, smokers and smoking gear, grill tools, outdoor griddles, outdoor kitchen appliances and grill covers to consider
Frequently asked questions
What is the Weber GS4 burner system and does my Genesis II have it?
Weber introduced the GS4 (Grilling System 4) with the 2017 Genesis II lineup. It includes four key improvements: infinity ignition, individual burner control valves, flavorizer bars, and a grease management system. If your Genesis II was made in 2017 or later with model designations E310 or E335, it likely has the GS4 system. The model year is usually on a sticker inside the firebox lid.
How often do flavorizer bars need to be replaced on a Weber Genesis II?
Weber's stainless steel flavorizer bars can last 5 years or more under regular use. Porcelain-enameled versions typically need replacement after 3 to 5 years, especially if they show significant rust, warping, or crumbling enamel. Replacing them before they deteriorate prevents grease from dropping directly onto the burners and reduces flare-up risk.
Can I use these parts on the Genesis II S310 or E330 instead?
The listing covers E310 and E335 specifically. Other Genesis II models like the S310 or E330 may share some part numbers, but the safest approach is to pull the part number directly from your grill and confirm it matches 66795 or 66032 before ordering. Weber part number lists are available on their support website.